The ZL50G front wheel loader is one of the most popular construction machines offered by XCMG-Europa. The basic version of the loader is equipped with a Rops driver’s cab, standard bucket and teeth. The equipment can be used for construction and agricultural works. More details are provided in the table.

We recommend to consider other loaders from our range, including the LW640G.


Machine weight:
18 T
6-cylinder turbocharged diesel engine with direct fuel injection, electronic control; power on the flywheel 164 kW at 2100 rpm

gearbox – power-shift type, fully switchable under load, four speeds forward and three reverse, single-stage, single-phase torque converter with dynamic ratio

high ratio, with planetary gear in hubs, all-axle drive; front axle fixed type, rear axle oscillating type with deflection angle of 280; unevenness overcoming ability – 476mm
Braking system:
Main brake – pneumatic/hydraulic brake for 4 wheels. Dry discs.
Working system hydraulics:
  • main gear pump
  • max. operating pressure – 18 MPa

23.5-25-16 PR (L3)
Working system:

“Z” type – controlled by joysticks, hydraulic steering system, articulated frame allows to operate machine smoothly; turning radius 6.4 m. Bucket operations cycle:


  • bucket lifting time – 6.5 s
  • bucket lowering time – 3.5 s
  • bucket dumping time – 1.5 s
  • Breaking force – 170 kN
  • Load capacity (for std. bucket) – 7000 kg
  • Lifting height to bucket pin 4110 mm
  • Height to the tooth in the lowest position during dumping 3090 mm


ROPS/FOPS, safe and silenced in accordance with EU standards, heated, with air conditioning and a radio set; anti-vibration seat; readable dashboard with errors monitoring system; joystick control; optional electronic scale for the material in the bucket
Central lubrication system:
BEKA – MAX (Germany), supplying lubricant to all grease points of the machine. Equipped with electronic controller with errors signaling and possibility of lubrication timing setting.
Reverse camera:
The system includes two elements: a small camera with wide-angle lens centrally located on engine rear hood and a colour LCD screen located in the cab within the operator’s range of vision.
  • standard – general-purpose bucket with teeth, capacity of 3.5 m3;
  • on special order: rock bucket with the capacity of 2.8 m3 or light material bucket with the capacity of 4.5 m3, pallet fork, compost fork, log grapple;
  • information: we have all parts for ZL50G loaders